Conveyor-Parts.com

Roach Conveyors
Belt Conveyors
 

Model 196RB Medium Duty Roller Bed Belt Conveyor

24 Hour Shipments Include All 1-Foot Increments 5'-0" to 100'-0"

Model 196RB, medium duty roller bed belt conveyor, is well suited for transporting unit loads with lesser horsepower requirements than slider bed belt conveyors.

 Roach-Medium-Duty-Roller-Bed-Belt-Conveyor
Quickly jump to a product group by clicking below
 
12"W Models 18"W Models 24"W Models 30"W Models 36"W Models 42"W Models 48"W Models Options

Specifications:
  • Belting:
    • PVC-120 black
  • Belt Speed:
    • 60 FPM, constant
  • Carrier Rollers:
    • 1.9" dia. x 16 ga. steel rollers, model 196S
  • Drive Pulley:
    • 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged
  • Tail Pulley:
    • 4" dia., crowned, with 1-3/16" dia. shaft
  • End Drive:
    • Allows one-direction (unit) operation; add optional center drive for reversible application
  • Squaring Rods:
    • Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'
  • Bed:
    • 3-1/2" x 1-1/2" x 10 ga. channel frame. Bed sections attached with couplings and floor supports
  • Bearings:
    • All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings
  • Take-Up:
    • Screw type unit at tail pulley provides 12" belt take-up
  • Return Rollers:
    • 1.9" dia. x 16 ga. steel, model 196S, adjustable
  • Floor Supports:
    • SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor
  • Motor Drive:
    • 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
  • Roller Chain:
    • Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base
  • Electrical Controls:
    • Optional
 
HP @ 60 FPM Reducer "A" "B" Max.
1/3 RBW13120-02 15 11/16" 33 7/32"
1/2 RBW13120-02 15 11/16" 33 7/32"
3/4 RBW13340-02 16 5/16" 34 5/16"
1 RBW13150-01 17 15/16" 34 5/8"
1 1/2 RBW13150-02 17 15/16" 34 5/8"
2 RBW13200-02 19 5/16" 36 5/16"
 

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
 

12"W Belt Models - 15" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-12-10 10' 3" 455 lbs.
196RB-12-20 20' 3" 693 lbs.
196RB-12-30 30' 3" 931 lbs.
196RB-12-40 40' 3" 1169 lbs.
196RB-12-50 50' 3" 1407 lbs.
196RB-12-60 60' 3" 1645 lbs.
196RB-12-70 70' 3" 1883 lbs.
196RB-12-80 80' 3" 2121 lbs.
196RB-12-90 90' 3" 2359 lbs.
196RB-12-100 100' 3" 2598 lbs.
Per Ft. Adder for custom length applications of 12"W belt models adds 24 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

18"W Belt Models - 21" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-18-10 10' 3" 516 lbs.
196RB-18-20 20' 3" 795 lbs.
196RB-18-30 30' 3" 1074 lbs.
196RB-18-40 40' 3" 1353 lbs.
196RB-18-50 50' 3" 1632 lbs.
196RB-18-60 60' 3" 1911 lbs.
196RB-18-70 70' 3" 2190 lbs.
196RB-18-80 80' 3" 2469 lbs.
196RB-18-90 90' 3" 2748 lbs.
196RB-18-100 100' 3" 3028 lbs.
Per Ft. Adder for custom length applications of 12"W belt models adds 28 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

24"W Belt Models - 27" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-24-10 10' 3" 595 lbs.
196RB-24-20 20' 3" 934 lbs.
196RB-24-30 30' 3" 1273 lbs.
196RB-24-40 40' 3" 1612 lbs.
196RB-24-50 50' 3" 1951 lbs.
196RB-24-60 60' 3" 2290 lbs.
196RB-24-70 70' 3" 2629 lbs.
196RB-24-80 80' 3" 2968 lbs.
196RB-24-90 90' 3" 3307 lbs.
196RB-24-100 100' 3" 3647 lbs.
Per Ft. Adder for custom length applications of 24"W belt models adds 34 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

30"W Belt Models - 33" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-30-10 10' 3" 663 lbs.
196RB-30-20 20' 3" 1057 lbs.
196RB-30-30 30' 3" 1451 lbs.
196RB-30-40 40' 3" 1841 lbs.
196RB-30-50 50' 3" 2239 lbs.
196RB-30-60 60' 3" 2633 lbs.
196RB-30-70 70' 3" 3027 lbs.
196RB-30-80 80' 3" 3421 lbs.
196RB-30-90 90' 3" 3815 lbs.
196RB-30-100 100' 3" 4210 lbs.
Per Ft. Adder for custom length applications of 30"W belt models adds 39 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

36"W Belt Models - 39" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-36-10 10' 3" 730 lbs.
196RB-36-20 20' 3" 1183 lbs.
196RB-36-30 30' 3" 1636 lbs.
196RB-36-40 40' 3" 2089 lbs.
196RB-36-50 50' 3" 2542 lbs.
196RB-36-60 60' 3" 2995 lbs.
196RB-36-70 70' 3" 3448 lbs.
196RB-36-80 80' 3" 3901 lbs.
196RB-36-90 90' 3" 4354 lbs.
196RB-36-100 100' 3" 4808 lbs.
Per Ft. Adder for custom length applications of 36"W belt models adds 45 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

42"W Belt Models - 45" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-42-10 10' 3" 832 lbs.
196RB-42-20 20' 3" 1398 lbs.
196RB-42-30 30' 3" 1964 lbs.
196RB-42-40 40' 3" 2530 lbs.
196RB-42-50 50' 3" 3101 lbs.
196RB-42-60 60' 3" 3662 lbs.
196RB-42-70 70' 3" 4228 lbs.
196RB-42-80 80' 3" 4794 lbs.
196RB-42-90 90' 3" 5360 lbs.
196RB-42-100 100' 3" 5927 lbs.
Per Ft. Adder for custom length applications of 42"W belt models adds 57 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

48"W Belt Models - 51" Between Frames

Model No. Bed Length Roller Centers* Weight
196RB-48-10 10' 3" 934 lbs.
196RB-48-20 20' 3" 1615 lbs.
196RB-48-30 30' 3" 2296 lbs.
196RB-48-40 40' 3" 2977 lbs.
196RB-48-50 50' 3" 3658 lbs.
196RB-48-60 60' 3" 4339 lbs.
196RB-4870 70' 3" 5020 lbs.
196RB-48-80 80' 3" 5701 lbs.
196RB-48-90 90' 3" 6382 lbs.
196RB-48-100 100' 3" 7064 lbs.
Per Ft. Adder for custom length applications of 48"W belt models adds 68 lbs. per ft.
* Roller Centers of 4.5", 6", 9", and 12" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

Options for Model 196RB Medium Duty Roller Bed Belt Conveyor

BELTING:  Black PVC ruff-top; 3-ply
brown neoprene ruff-top; PVC-120 white
food grade COS; PVC-150 black COS;
3-ply CN 40 urethane cover. Conusult Material Flow for availability on other types of belting.

CENTER DRIVE :  Reversible drive with integral belt take-up of 24". Specify location. Center drive option available on units 6'-0" long and greater.

SIDE MOUNTED END DRIVE :  Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia. drive pulley).

OVERHEAD END DRIVE: Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia.drive pulley).

AUXILIARY TAKE-UP :  Provides 24" of belt take-up. Specify location.

NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35°.

FLOOR SUPPORTS :  Other heightsupports, knee braces, casters and polytier supports available. See listing of floor supports available for 24 hr. shipment.

SIDE TABLES: Available in 9", 15" and 21" widths (14 ga.) one or both sides.

UNDERTRUSSED BED: Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit.

CEILING HANGERS: 5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOB (furnished in place of floor supports).

BELT SPEED: Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note:
Capacity Changes With Speed.

GUARD RAILS: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG in 2", 4" and 6" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).

MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/reversing /stop push button station. Mounting and pre-wiring for units up to 12' long.