Conveyor-Parts.com

Roach Conveyors
Belt Conveyors

 

Model 196RBF Roller Bed Inclined Floor-To-Floor
Belt Conveyor

24 Hour Shipments Include All 1-Foot Increments 10'-0" to 50'-0"

Model 196RBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35°. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.

 Roach-Inclined-Floor-to-Floor-Conveyor
 
Quickly jump to a product group by clicking below
 
12"W Models 18"W Models 24"W Models 30"W Models 36"W Models 42"W Models 48"W Models Options

Specifications:
  • Belting:
    • Black PVC ruff-top
  • Belt Speed:
    • 60 FPM, constant
  • Carrier Rollers:
    • 1.9" dia. x 16 ga. steel rollers, model 196S
  • Drive Pulley:
    • 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged
  • Tail Pulley:
    • 4" dia., crowned, with  1-3/16" dia. shaft
  • Center Drive:
    • Reversible drive with 24" integral belt take-up
  • Nose-Over:
    • Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double)
  • Bed:
    • 3-1/2" x 1-1/2" x 10 ga. channel frame. Bed sections attached with couplings and floor supports
  • Bearings:
    • All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings
  • Return Rollers:
    • 1.9" dia. x 16 ga. steel, model 196S, adjustable
  • Motor Drive:
    • 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
  • Roller Chain:
    • Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base
  • Floor Supports:
    • Optional
  • Electrical Controls:
    • Optional
 
HP @ 60 FPM Reducer "A" "B" Max.
1/3 RBW13120-02 17 3/8" 55 7/32"
1/2 RBW13120-02 17 3/8" 55 7/32"
3/4 RBW13340-02 17 25/32" 56 5/16"
1 RBW13150-01 19 1/2" 56 5/8"
1 1/2 RBW13150-02 19 1/2" 56 5/8"
2 RBW13200-02 20 5/16" 58 5/16"
 

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

 

12"W Belt Models - 15" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-12-10 10' 3" 449 lbs.
196RBF-12-20 20' 3" 681 lbs.
196RBF-12-30 30' 3" 913 lbs.
196RBF-12-40 40' 3" 1145 lbs.
196RBF-12-50 50' 3" 1385 lbs.
Per Ft. Adder for custom length applications of 12"W belt models adds 24 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

18"W Belt Models - 21" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-18-10 10' 3" 509 lbs.
196RBF-18-20 20' 3" 781 lbs.
196RBF-18-30 30' 3" 1053 lbs.
196RBF-18-40 40' 3" 1325 lbs.
196RBF-18-50 50' 3" 1605 lbs.
Per Ft. Adder for custom length applications of 12"W belt models adds 28 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

24"W Belt Models - 27" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-24-10 10' 3" 586 lbs.
196RBF-24-20 20' 3" 917 lbs.
196RBF-24-30 30' 3" 1246 lbs.
196RBF-24-40 40' 3" 1575 lbs.
196RBF-24-50 50' 3" 1905 lbs.
Per Ft. Adder for custom length applications of 24"W belt models adds 33 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

30"W Belt Models - 33" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-30-10 10' 3" 654 lbs.
196RBF-30-20 20' 3" 1039 lbs.
196RBF-30-30 30' 3" 1424 lbs.
196RBF-30-40 40' 3" 1778 lbs.
196RBF-30-50 50' 3" 2158 lbs.
Per Ft. Adder for custom length applications of 30"W belt models adds 38 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

36"W Belt Models - 39" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-36-10 10' 3" 719 lbs.
196RBF-36-20 20' 3" 1161 lbs.
196RBF-36-30 30' 3" 1603 lbs.
196RBF-36-40 40' 3" 2045 lbs.
196RBF-36-50 50' 3" 2485 lbs.
Per Ft. Adder for custom length applications of 36"W belt models adds 44 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

42"W Belt Models - 45" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-42-10 10' 3" 819 lbs.
196RBF-42-20 20' 3" 1372 lbs.
196RBF-42-30 30' 3" 1925 lbs.
196RBF-42-40 40' 3" 2478 lbs.
196RBF-42-50 50' 3" 3028 lbs.
Per Ft. Adder for custom length applications of 36"W belt models adds 55 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

48"W Belt Models - 51" Between Frames

Model No. Bed Length Roller Centers* Weight
196RBF-48-10 10' 3" 920 lbs.
196RBF-48-20 20' 3" 1587 lbs.
196RBF-48-30 30' 3" 2254 lbs.
196RBF-48-40 40' 3" 2921 lbs.
196RBF-48-50 50' 3" 3591 lbs.
Per Ft. Adder for custom length applications of 36"W belt models adds 67 lbs. per ft.
* Roller Centers of 4.5", 6", and 9" available for 24 hour shipment. Contact Material Flow at 1-800-338-1382 for information.
F.O.B. AR.

Options for Model 196RBF Roller Bed Inclined Floor-To-Floor Belt Conveyor

BELTING:  3 ply, brown neoprene ruff-top. Conusult Material Flow for availability on other types of belting.

SIDE MOUNTED END DRIVE :  Available
as option when necessary to move center drive for unit clearance. Minimum horizontal nose-over length required is 3' (2' horizontal may be used if product does not overhang conveyor OAW).

192S CARRIER ROLLERS:1.9" dia. x 12 ga. steel carrier rollers, model 192S, available in model 192RBF.

CEILING HANGERS:5/8" dia. threaded rod w/ hardware to attach rods (specify rod length) to conveyor.

FLOOR SUPPORTS :  Various height adjustable supports and knee braces available. See listing of floor supports available for 24 hr. shipment.

UNDERTRUSSED BED:Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit.

POWERED FEEDER:Integral belt feeder or separate chain driven belt feeder.

GUARD RAILS:1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG) in 2", 4" and 6" heights.

BELT SPEED:Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity Changes With Speed.

MOTORS:Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

ELECTRICAL CONTROLS:Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/reversing /stop push button station.