Model 350BSB
Medium Duty Box Style Slider Bed Belt Conveyor

24 Hour Shipments Include All 1-Foot Increments 5'-0" to 100'-0"

Model 350BSB features a box style slider bed which offers a smooth work surface, ideal for workers stationed beside this conveyor. The 350BSB is an economical choice for tasks such as packing, testing and inspecting.

• Belting:
  • PVC-120 black
• Drive Pulley:
  • 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged
• Tail Pulley:
  • 4" dia., crowned, with 1-3/16" dia. shaft
• End Drive:
  • Allows one-direction (unit) operation; add optional center drive for reversible application
• Take-Up:
  • Screw type unit at tail pulley provides 12" belt take-up

• Bed:
  • 3-5/8" deep x 12 ga. box type construction
• Bearings:
  • All pulley bearings are  precision, heavy duty, lubricated, ball bearing units with cast iron housings
• Return Rollers:
  • 1.9" dia. x 16 ga. steel, model 196S, adjustable
• Floor Supports:
  • SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.

• Belt Speed:
  • 60 FPM, constant
• Motor Drive:
  • 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
• Roller Chain:
  • Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base
• Electrical Controls:
  • Optional

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

BELTING:  Black PVC ruff-top; 3-ply brown neoprene ruff-top; PVC-120 white food grade COS; PVC-150 black COS; 3-ply CN 40 urethane cover. Conusult Material Flow for availability on other types of belting.

CENTER DRIVE :  Reversible drive with integral belt take-up of 24". Specify location. Center drive option available on units 6'-0" long and greater.

SIDE MOUNTED END DRIVE :  Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia. drive pulley).

OVERHEAD END DRIVE: Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia.drive pulley).

AUXILIARY TAKE-UP :  Provides 24" of belt take-up. Specify location.

NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35°. Feeders also available.

FLOOR SUPPORTS :  Other height
supports, knee braces, casters and polytier supports available. See listing of floor supports available for 24 hr. shipment.

SIDE TABLES:Available in 9", 15" and 21" widths (14 ga.) one or both sides.

UNDERTRUSSED BED:Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit.

CEILING HANGERS:5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOB (furnished in place of floor supports).

BELT SPEED:Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity Changes With Speed.

GUARD RAILS:1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG in 2", 4" and 6" heights; fixed channel (model FC); 1-1/2" angle (model GA1-1/2).

MOTORS:Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

ELECTRICAL CONTROLS:Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/reversing /stop push button station. Mounting and pre-wiring for units up to 12' long.