Conveyor-Parts.com

Roach Conveyors
Belt Conveyors

Model 350SBF
Slider Bed Inclined Floor-To-Floor Belt Conveyor

24 Hour Shipments Include All 1-Foot Increments 10'-0" to 50'-0"

Model 350SBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35°. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.

 Roach-Slider-Bed-Inclined-Floor-to-Floor-Conveyor
Quickly jump to a product group by clicking below
 
6"W Models 12"W Models 18"W Models 24"W Models 30"W Models 36"W Models Options

Specifications:
  • Belting:
    • Black PVC ruff-top
  • Belt Speed:
    • 60 FPM, constant
  • Carrier Rollers:
    • 1.9" dia. x 16 ga. steel rollers, model 196S
  • Drive Pulley:
    • 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged
  • Tail Pulley:
    • 4" dia., crowned, with 1-3/16" dia. shaft
  • Center Drive:
    • Reversible drive with 24" integral belt take-up
  • Nose-Over:
    • Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double)
  • Bed:
    • 3-1/2" x 1-1/2" x 10 ga. channel frame with 14 ga. slider bed
  • Bearings:
    • All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings
  • Return Rollers:
    • 1.9" dia. x 16 ga. steel, model 196S, adjustable
  • Motor Drive:
    • 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
  • Roller Chain:
    • Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base
  • Floor Supports:
    • Optional
  • Electrical Controls:
    • Optional
 
HP @ 60 FPM Reducer "A" "B" Max.
1/3 RBW13120-02 17 3/8" 55 7/32"
1/2 RBW13120-02 17 3/8" 55 7/32"
3/4 RBW13340-02 17 25/32" 56 5/16"
1 RBW13150-01 19 1/2" 56 5/8"
1 1/2 RBW13150-02 19 1/2" 56 5/8"
2 RBW13200-02 20 5/16" 58 5/16"
 

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

 

6"W Belt Models - 12" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-6-10 10' 8" 265 lbs.
350SBF-6-20 20' 8" 331 lbs.
350SBF-6-30 30' 8" 395 lbs.
350SBF-6-40 40' 8" 459 lbs.
350SBF-6-50 50' 8" 526 lbs.
Per Ft. Adder for custom length applications of 6"W belt models adds 7 lbs. per ft.
F.O.B. AR.

12"W Belt Models - 18" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-12-10 10' 8" 299 lbs.
350SBF-12-20 20' 8" 386 lbs.
350SBF-12-30 30' 8" 473 lbs.
350SBF-12-40 40' 8" 560 lbs.
350SBF-12-50 50' 8" 654 lbs.
Per Ft. Adder for custom length applications of 12"W belt models adds 9 lbs. per ft.
F.O.B. AR.

18"W Belt Models - 24" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-18-10 10' 8" 369 lbs.
350SBF-18-20 20' 8" 506 lbs.
350SBF-18-30 30' 8" 641 lbs.
350SBF-18-40 40' 8" 779 lbs.
350SBF-18-50 50' 8" 926 lbs.
Per Ft. Adder for custom length applications of 18"W belt models adds 14 lbs. per ft.
F.O.B. AR.

24"W Belt Models - 30" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-24-10 10' 8" 422 lbs.
350SBF-24-20 20' 8" 568 lbs.
350SBF-24-30 30' 8" 728 lbs.
350SBF-24-40 40' 8" 887 lbs.
350SBF-24-50 50' 8" 1059 lbs.
Per Ft. Adder for custom length applications of 24"W belt models adds 16 lbs. per ft.
F.O.B. AR.

30"W Belt Models - 36" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-30-10 10' 8" 434 lbs.
350SBF-30-20 20' 8" 608 lbs.
350SBF-30-30 30' 8" 782 lbs.
350SBF-30-40 40' 8" 956 lbs.
350SBF-30-50 50' 8" 1146 lbs.
Per Ft. Adder for custom length applications of 30"W belt models adds 21 lbs. per ft.
F.O.B. AR.

36"W Belt Models - 42" Overall Width

Model No. Bed Length Pulley Diameter Weight
350SBF-36-10 10' 8" 477 lbs.
350SBF-36-20 20' 8" 672 lbs.
350SBF-36-30 30' 8" 872 lbs.
350SBF-36-40 40' 8" 1071 lbs.
350SBF-36-50 50' 8" 1312 lbs.
Per Ft. Adder for custom length applications of 36"W belt models adds 24 lbs. per ft.
F.O.B. AR.

Options for Model 350SBF Slider Bed Inclined Floor-To-Floor Belt Conveyor

BELTING:  3 ply, brown neoprene ruff-top. Conusult Material Flow for availability on other types of belting.

SIDE MOUNTED END DRIVE :  Available
as option when necessary to move center drive for unit clearance. Minimum horizontal nose-over length required is 3' (2' horizontal may be used if product does not overhang conveyor OAW).

192S CARRIER ROLLERS: 1.9" dia. x 12 ga. steel carrier rollers, model 192S, available in model 192RBF.

CEILING HANGERS: 5/8" dia. threaded rod w/ hardware to attach rods (specify rod length) to conveyor.

FLOOR SUPPORTS :  Various height adjustable supports and knee braces available. See listing of floor supports available for 24 hr. shipment.

UNDERTRUSSED BED: Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit.

POWERED FEEDER: Integral belt feeder or separate chain driven belt feeder.

GUARD RAILS: 1-3/4" x 1" formed channel (model GC), adjusts horizontally to 10" wider than belt and vertically to 6" above belt; formed steel fixed (model FSG) in 2", 4" and 6" heights.

BELT SPEED: Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Note: Capacity Changes With Speed.

MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/reversing /stop push button station.