Model 250TB Trough Bed Belt Conveyors

24 Hour Shipments Include All 1-Foot Increments 5'-0" to 100'-0"

The 250TB Trough Bed Belt Conveyor is ideal for handling chips, slugs, scrap wood, paper waster, boxes, packages and cartons. The troughed frame design offers integral guard rails for many trash conveyor applications.

• Belting:
  • PVC-120 black
• Drive Pulley:
  • 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged
• Tail Pulley:
  • 4" dia., crowned, with 1-3/16" dia. shaft
• End Drive:
  • Allows one-direction (unit) operation; add optional center drive for reversible application
• Take-Up:
  • Screw type unit at tail pulley provides 12" belt take-up

• Bearings:
  • All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings
• Return Rollers:
  • 1.9" dia. x 16 ga. steel, model 196S, adjustable
• Belt Speed:
  • 60 FPM, constant
• Bed:
  • 3-1/2" deep x 12 ga. box type bed with bed pan braces (all widths) and with 2-1/2" deep x 12 ga. formed trough with formed flanges on sides to provide extra strength

• Floor Supports:
  • SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor
• Motor Drive:
  • 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
• Roller Chain:
  • Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base
• Electrical Controls:
  • Optional

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

BELTING:  Black PVC ruff-top. Conusult Material Flow for availability on other types of belting.

CENTER DRIVE :  Reversible drive with integral belt take-up of 24". Specify location. Center drive option available on units 6'-0" long and greater.

SIDE MOUNTED END DRIVE :  Provides minimum conveyor height of 10" TOB (4" dia. drive pulley); 12" TOB (8" dia. drive pulley).

AUXILIARY TAKE-UP :  Provides 24" of belt take-up. Specify location.

BELT SPEED:  Constant speed 25-120 FPM through 1.5 HP; 41-120 FPM for 2 HP; 38-120 FPM for 2 HP with 8" dia. end drive. DC variable speed through 1.5 HP available with MINIMUM operating speed range 1.25-25 FPM; 2-40 FPM for 2 HP; MAXIMUM operating speed range 6-120 FPM. NOTE: Capacity changes with speed.

MOTORS:  Available through 2 HP. Also available in TEFC (totally encloses fan cooled).

FLOOR SUPPORTS :  Other height supports available. See listing of floor supports available for 24 hr. shipment.

CEILING HANGERS :  5/8" dia. threaded rod with hardware to attach rods to conveyor. Provides 6' clearance between ceiling and TOB (furnished in place of floor supports).

GUARD RAILS :  Available in 2", 4" and 6" heights (model FSG) to attach to troughed frame to increase trough depth.

ELECTRICAL CONTROLS :  Consult Material Flow at 1-800-338-1382.